iMapper Starter Guide
iMapper Racer 3 Plus
Racer 3 Plus : How to use it This page is dedicated to the use of iMapper Racer 3 Plus and his new functionality: wireless. To use the wireless functionality of iMapper you need to follow these steps: Turn ON iMapper Racer 3 Plus Open the right App: iMapper Connect App (iPhone & iPad) iMaFeatured(OLD) iMapper Racer 1 & 2: quick on-boarding protocol
Welcome on board, we are delighted to have you! Watch the informative video (2 mins) First things first, watch this video to learn a few tips on how to use your iMapper efficiently youtube Tips on how to use iMapper (rjIjZ0FeaturediMapper Racer 3 Starter Guide: quick on-boarding protocol
Welcome on board, we are delighted to have you! Watch the informative video (2 mins)PopularHow to take your first scans with iMapper 1 and 2
Welcome to a step-by-step guide on how to take your first horizontal and vertical scans For iMapper Racer 1 & 2 only. If you have an iMapper Racer 3, go to these articles: iMapper Racer 3 Starter Guide: quick on-boarding protocol How to take your first scans with iMapper Racer 3Popular
Hardware
Leveling the iMapper with the bubble level
To level your iMapper use the round bubble level provided to check that the iMapper is horizontal (don’t use the level on the tripod it is not accurate enough). Fix the iMapper horizontally on the tripod. Put the bubble level on top of the iMapper Check if the bubble is in the center. If the bubble is not in the center, loosen the screw of the ball joint and slightly rotate it to have the bubble in the center on the top on the iMapper. If the bubble is in the center, tighten thFew readersHow to set up date and time on your iMapper
On a computer, create a .txt file on the SD card Rename it forcetime.txt Put the SD card into the iMapper Start the iMapper, it takes the date and time of the creation of the forcetime.txt file and suppress the forcetime.txt file Check the next scans date when you import it on the iMapper platform, it should be the right date. Done!Few readersAdjusting the intervals between pointclouds
This feature concerns iMapper Racer 1 & 2 only. At the beginning of a scan or during the scanning process with iMapper, you have the option to adjust the intervals between the point clouds according to your preference. To enter the setting mode, simply place your hand in front of the sensor within a range of 1 to 20 cm. Then, remove your hand with a quick vertical gesture, akin to a ninja's swift movement. Additionally, a beep tone will sound at either a slower or faster pace, indicFew readers